All Struble Rod
Building Components
are Made In The U.S.A.
|
|
Struble All Aluminum Saltwater Fly Seats
Quality,
precision and dependability. Great care is taken to ensure that these
three elements are built into every Struble Reel Seat. From design to
manufacture, every Struble Seats must satisfy exacting standards of
quality and craftsmanship. Making use of only the finest materials
available, Glen Struble Manufacturing has created the finest, most
comprehensive line of quality reel seats available to the fly tackle
industry. MADE IN THE U.S.A.
U18 Saltwater Seat
|
|
|
Machined aluminum front retainer covered by contoured
cork ring (supplied). 'V' threaded body 3.975" long. Body I.D.
.620". Supplied with two
locking nuts with 'O' ring between bearing on a machined slip ring. Slip
ring is machine contoured inside and out and is designed not to tilt
when nut tightens down.
Designed primarily for use with heavier
fly reels. Black anodized for corrosion resistance in salt water
applications. U7 has square cut threads, two heavy duty knurled lock
nuts separated by a compressible 'O' ring. U6 has 'V' cut threads and
the second lock nut and slip ring are combined with the 'O' ring
embedded in the slip ring. Body has milled section to accommodate the
larger reel foot. Both units supplied with removable butt plug. Body
I.D. .584. Assembled.
View Fighting Butt
|
|
|
|
|
Small diameter metal seat designed for
saltwater use. Machined aluminum front retainer covered by contoured
cork ring (supplied). 'V' threaded body 3.940" long. Supplied with two
locking nuts with 'O' ring between bearing on a machined slip ring. Slip
ring is machine contoured inside and out and is designed not to tilt
when nut tightens down.
© All Rights Reserved.
Shoff Tackle Co. All graphics water-marked.
|
|